Construction Adhesives & Sealants Manufacturer — INGADA

From flooring adhesives to construction sealants and assembly bonding systems, INGADA supports distributors, project contractors, and manufacturers with application-focused products, technical expertise, and scalable manufacturing.

Pinggu, Beijing, China

BUSINESS & R&D

Yangzhou, Jiangsu, China

MANUFACTURING

MS Polymer · Silicone · PU

SYSTEMS

OEM / ODM / Private Label

SUPPLY MODE

01

Find the Right Adhesive for Your Application

Explore INGADA’s adhesive and sealant portfolio by product technology, application, and performance requirements. Our team can help you identify suitable products based on your substrates, operating conditions, and project specifications.

Product category

Floor Adhesives Series

MS polymer adhesives for parquet, resilient and PVC flooring, including acoustic and vibration-damping grades.

Product category

Anti-Mold Sealant

Sanitary-grade sealants for wet areas and interior joints, formulated to resist mould growth.

Product category

Silicone Structural Sealant

High-modulus structural silicone for structural glazing and load-bearing facade joints.

Product category

Silicone Weatherproof Sealant

Neutral and acid-cure silicones for facade, window and joint weathersealing, with low-modulus and specialist grades.

Product category

Polyurethane Foam Sealant

One-component flexible and rigid PU foams for insulation, gap filling and panel installation.

Product category

Special Function Adhesives

Single-purpose formulations specified against a defined service condition, including high-temperature sealing.

Product category

MS Weatherproof Sealant

Ultra-low-modulus polyether sealants for expansion joints and high-movement sealing.

Product category

MS Bonding Adhesives Series

High-grab structural and multi-purpose MS adhesives for panel, trim and component bonding.

Product category

Automotive Bonding Adhesives

Interior trim and lamp assembly adhesives for automotive production lines.

Model names open the product page. The catalogue keeps growing, so the models shown are a selection.

02

Solutions by Industry & Application

Each solution page explains the selection criteria for that application, the products we recommend and why, and the documents you can request before you commit to a specification.

solution facades glazing

Facades & Glazing

Sealants and structural adhesives for curtain wall, skylight and exterior cladding, matched to substrate, joint movement and UV exposure.

Substrates
Aluminium · Glass · Stone · Coated metal
Joint type
Structural glazing, weatherproof
Exposure
Outdoor, UV, wind load, thermal movement
→
solution windows doors joints

Windows, Doors & Joints

Sealing and bonding for window and door perimeters, metal frames and precast joints. Includes fenestration silicones and PU frame foams.

Substrates
PVC · Aluminium · Timber · Masonry · Concrete
Joint type
Perimeter sealing, frame cavity fill
Exposure
Outdoor, driving rain, daily thermal cycling
→
solution metal roofing flashing

Metal Roofing & Flashing

Weatherproofing for metal sheet laps, roof joints, flashing and edge trim. Low-modulus and self-levelling grades for both horizontal and vertical work.

Substrates
Coated steel · Aluminium · Galvanised sheet
Joint type
Lap sealing, non-structural bonding
Exposure
Outdoor, ponding, high sheet movement
→
solution flooring sports surfaces

Flooring & Sports Surfaces

Adhesives for wood, PVC and resilient flooring, sports surfaces and acoustic systems. Low-VOC and phthalate-free options for indoor installation.

Substrates
Timber · SPC · PVC · Screed · Bamboo
Joint type
Full-bed adhesive, acoustic isolation
Exposure
Indoor, underfloor heating, high footfall
→
solution interior wet areas

Interior & Wet Areas

Mould-resistant sealants and adhesives for kitchen, bath, sanitary and pool environments, selected for permanent moisture exposure.

Substrates
Porcelain · Glass · Stainless · Quartz · Glazed ceramic
Joint type
Movement joint, mould-resistant sealing
Exposure
Indoor, permanent humidity, cleaning agents
→
solution industrial bonding sealing

Industrial Bonding & Sealing

Bonding and sealing for construction panels, profiles and transport interiors. High-grab MS adhesives and high-temperature grades for assembly.

Substrates
Metal · Engineering plastics · Composite · Glass
Joint type
Structural and semi-structural bonding
Exposure
Vibration, thermal cycling, production-line cure
→

03

Compliance is declared per product — not per brand

Each entry below states the product scope the document covers and the evidence we can provide. Availability is confirmed against the exact model and target market before it is quoted.

Compliance / Document Product scope Evidence available
Applicable CE / EN 15651 classification Specify applicable sealant models and classifications Declaration and supporting documents, where applicable
ISO 9001 Manufacturing quality management system Valid certificate, if held
ISO 11600 classification Applicable sealant models Classification / test documentation, where available
REACH / RoHS Applicable product formulations Relevant declarations or test reports
VOC / indoor air emission Tested indoor-use products Applicable test report or classification
Food-contact suitability Only products intended for the specified contact use Product- and use-specific supporting evidence, where applicable

Documents are issued per model. Whether a specific document is available is confirmed against the exact item and target market before it is quoted.

01 / DOCS

Technical documentation

TDS and SDS for every item, plus test reports and the applicable certificate for the product you are evaluating. Issued as a document set for your market, not as a generic brochure.

02 / QC

Quality control & traceability

Batch records retained against production lots. COA per batch, and quality claims traceable to the production batch for 30 days after delivery.

03 / ENGINEERING

Application engineering

Joint dimension and movement review, substrate compatibility checks and application guidance — before the specification is fixed, not after the first failure.

04 / COMPLIANCE

Product compliance

Compliance is documented per model, not per range. Ask for the certificate or test report of the specific item — we send its exact document set.

04

Capacity you can plan against

Production planning, packaging options and lead times are confirmed against product specifications, order volume and cooperation requirements. The figures below describe the plant; the four sections after them describe how an order is actually run.

50,000+ Tons annual capacity
50,000+ m² Workshop area
30 Production lines
100+ Workers & staff

Manufacturing capacity

Multiple production lines across silicone, MS polymer and polyurethane systems, sized for both project quantities and programme supply.

Quality & traceability

Incoming material inspection, in-process checks and retained batch samples. Documentation travels with the shipment.

Supply planning

Order confirmation states a committed production window, and the pre-shipment document set is agreed at that point — not promised as a percentage.

Flexible cooperation

Standard product supply, private label and custom formulation. The right mode depends on your volume and how much of the specification you own.

Minimum order / model
1,920 sausage / 3,840 cartridges
Lead time from deposit
3–4 weeks, standard models
Samples
Free, max 6 pcs, freight collect
Payment
50% T/T deposit, 50% before shipment
Trial order
From 960 sausage or 2,400 cartridges. 5–10% surcharge, credited on a full MOQ order within 3 months.
Stock models
SR-100 · SR-105 · SR-25 · SR-35
MS-35 · MS-35H · MS-35W · MS-77CAvailability confirmed per batch.
Market access
SABER and other national approvals: we handle the paperwork, typically 15–60 days.

05

Where the specification was tested

Selected projects where an application decision — not a price — determined the product. Project names are published only where the client reference is cleared for disclosure.

06

Three ways to work with us — they are not interchangeable

With INGADA, you can choose the cooperation model that best fits your business. From ready-to-market products to tailored solutions, we support your project at every stage.

Mode 01

Standard product supply

Existing catalogue

You specify an existing model, we supply it under the INGADA brand or unbranded. Fastest route, lowest documentation overhead.

  • TDS / SDS and certificate set per item
  • Cartridge, sausage and pail formats
  • Shipment-level batch traceability
Mode 02

Private label

Your brand, our formulation

Your logo, artwork and packaging on an existing formulation. The commercial terms below are the entry point most buyers ask about first.

  • MOQ from 3,840 sausage / 5,760 cartridges
  • First order 5–6 weeks, reorders 3–4 weeks
  • Artwork approval before mass production
  • Carton, label and language version per market
Mode 03

Custom formulation

Your specification, our development

For performance requirements the catalogue does not cover: adhesion to a specific substrate, colour, cure speed or regulatory target.

  • Formulation development, typically 2–4 weeks
  • Sample evaluation before production release
  • Production, typically 5–6 weeks after approval

07

Technical reading, written for buyers rather than for search engines

Selection guides, chemistry comparisons and sourcing notes. Each article states the conditions under which its advice does not apply.